|
|
|
|
|
Optical systems operating on the basis of the Nd:YAG laser
ROS - 020 SHG
Ready- made optical system of the neodymium laser in a second harmonic generation mode. The system is provided with a single- lamp head, optical resonator, KTP crystal, q-switch and SMA - 905 connector. The system is designed mainly to operate in medical lasers, but it can also be used in other applications. To supply the system it is possible to use the dedicated ESCS - 020 system or other with suitable parameters. The head is provided with a typical high- pressure krypton lamp with the life of ca. 250 [h]. The system as an OEM construction is equipped with jumpers and fastening openings, which makes it very simple to use. An additional advantage is the isolation of the head compartment from the remaining part of the optical system. This enables to perform operational lamp replacement without opening the remaining optical system which would otherwise be contaminated. Technical parameters: Laser type Nd:YAG SHG Wavelength 532 [nm] Operating mode quasi cw Repetition frequency 100-5000 [Hz] Average output power 10 [W]
ROS - 020 THG
The ready- made optical system of the neodymium laser generating third harmonic. The system is provided with a single- lamp head, optical resonator, KTP and CLBO crystals, q-switch and SMA - 905 connector. The system is intended mainly to operate in medical lasers but can also be used in other applications. To supply the system one can use the dedicated ESCS - 020 system or other with suitable parameters. The head is provided with a typical high- pressure krypton lamp with 250 [h] lifetime. The system as an OEM construction is provided with jumpers and fastening openings, which makes it very simple to use. An additional advantage is the isolation of the head compartment from the remaining optical part of the system. This enables to perform operational replacement without opening the remaining optical part which would otherwise be contaminated.
ROS - 020 QCW Ready made optical system of the neodymium laser operating in the quasi - cw mode with a q-switch. The system is composed of a single - lamp pump cavity provided with the BaS04 reflector, 5x 100 [mm] lamp and Nd:YAG 4x 100 [mm] rod, and q-switch and resonator. Additionally, the system is equipped with the beam - launching system into the SMA - 905 fiber connector. The main appropriation of the system are medical lasers. The following subassemblies are dedicated to co - operate with the system: ESCS - 020 CW 3kW power supply; ESCON - 040 and ESUP - 020 controllers. The system can also co - operate with any other power supply systems with suitable parameters.
Specification of available options for the ROS - 020 system
|
|
|
