| |
Diffuse
pump
cavities for solid-state lasers
NO CORROSION
NO REFLECTOR DEGRADATION
NO PROBLEMS
EASY LAMP & ROD
REPLACEMENT
10 YEARS WARRANTY |
|
The
offered optical pump cavities are intended to be used in solid-state
lasers. The cavities are made of
high quality acid –resistant steel and are thereby resistant to
aggressive cooling media. The reflectors utilized in the cavities are made
of BaSO4 and Al ceramics, which results in high efficiency.
Owing to diffusion reflection, one obtains very uniform pumping of the
entire volume of the rod, which gives a uniform power distribution in the
beam cross-section. Suitable quartz filters are installed in the
reflectors upon the customer’s needs. The cavity construction enables to
perform easy replacement of the lamp and rod when performing servicing
work.
Apart from the standard ones, available are also the cavities with
other dimensions ( with dimensions peculiar for other types of cavities
designed for the lasers from another manufacturers), by individual orders.
EPC-150/120 B OL |
|
The
reflector utilized in the cavity are made
of BaSO4
Max.
dimensions of the rod: 8 x 150 {mm}
Lamp:
Arc or Flash lamp with max. arc dimensions 8 x 120 |
EPC-150/120 S OL |
|
The
reflector utilized in the cavity are made
of Al
ceramics
Max.
dimensions of the rod: 8 x 150 {mm}
Lamp:
Arc or Flash lamp with max. arc dimensions 8 x 120 |
EPC-104/92 S OL |
|
The
reflector utilized in the cavity are made
of Al
ceramics
Max.
dimensions of the rod: 5 x 108 {mm}
Lamp:
Arc or Flash lamp with max. arc dimensions 5 x 90 |
|
Now we have special promotion prices
for the cavities.
If you are interested please contact us immediately ! |
Standard pricelist for 1-5 pcs quantity
TYPE |
PRICE |
EPC-104/92 B
OL |
$1.200,00,- |
EPC-104/92 B DL |
$1.400,00,- |
EPC-104/92 S OL |
$990,00,- |
EPC-104/92 S DL |
$1.250,00,- |
EPC-150/120 B OL |
$1.700,00,- |
EPC-150/120 S OL |
$1.450,00,- |
EPC-150/120 B-DL |
$2.500,00,- |
EPC-150/120 S-DL |
$2.100,00,- |
EPC-290/270 B-DL-Nd-15-18 |
$4.943,00,- |
Explanation
of description
EPC
– LLL/AAA T NN RR DD LL
LLL-
minimal length of rod in [mm], (If, it is to be installed without an extension
sleeves. If you use extension sleeves you can use shorter rod.)
AAA-active
region in diffusion reflector (length of arc in the lamp) in [mm]
T-
type of diffusion reflector – B = BaSO4; S = AL ceramic.
NN-
number of lamps – OL = one lamp; DL = two lamps
RR
– type of the rod
DD
– diameter of the rod
LL
– diameter of the lamp
|
|
Important
- High - performance reflective materials
- High
thermal resistance
- High
corrosion resistance, deionization filters not needed
- Materials:
acid - resistant steel, fused quartz, ceramics, silicone o-rings
|