|
|
Laboratory power supplies for pulse and cw lasers
ESS-3000 The device is a laboratory - version charger designed to load capacitors in experimental systems. The parameters of the device are close to those of the CHG - 3000 charger enriched by the ESUP - 020 microprocessor controller and SMP - 010 simmer.
ESCS-020CW 3kW A complete power supply of the OEM version, designed to supply the CW laser with the lamp power of 3 [kW]. The system has a feature separately regulated threshold and working currents. This function enables to change to the stand - by mode without the need to switch the laser off.
Technical parameters: power supply 1 x 230AC [V] instantaneous current consumption do 25 [A] average current consumption do 20 [A] inputs open collector outputs open collector operation frequency of the converter 50 [kHz] reference voltage 0-6 [V] output current 5-25 [A] supporting of ignition 1[uF] 1000 [V] serial inductance 80 [uH] serial ignition 20 [kV] idle time after switch-on 2 [s]
ESCS-020CW 6kW A complete power supply of the OEM version, designed to supply the CW laser with the lamp power of 6 [kW]. The system has a feature separately regulated threshold and working currents. This function enables to change to the stand - by mode without the need to switch the laser off.
Technical parameters: power supply 3 x 230AC [V] instantaneous current consumption do 20 [A] average current consumption do 15 [A] inputs open collector outputs open collector operation frequency of the converter 50 [kHz] reference voltage 0-6 [V] output current 5-45 [A] supporting of ignition 1[uF] 1000 [V] serial inductance 80 [uH] serial ignition 20 [kV] idle time after switch-on 2 [s]
|
|